YET-A1 Microcomputer Resist Lubricator

YET-A1-2L

YET-A1:

  1. Quality guaranteed, with European CE approval.

  2. Three kinds of running mode:

    • Lubrication: The lubricator runs according to its lubricating time after the power is on.

    • Intermittence: The lubricator runs according to its intermittent time after the power is on.

    • Time-memory: The lubricator runs according to its time recording after the power is back.

  3. Lubricating and intermittent time can be adjusted.

  4. A float switch outputs alarm signal when lubricant level is low.

  5. An over temperature/load protector is attached to the motor.

  6. Fixed pressure function of pressure relief valve can prevent pumps from damage.

  7. Lubricating time (second/minute) and intermittent time (second/minute/hour/cycle) are selectable.

  8. The indicator on panel can display every running state.

  9. The intermittent period can be adjusted according to the machine's action.

  10. A pressure switch is optional (YET-A1P1)

  11. Press "RES" key can force the lubricator to lubricate.

  12. Must be used with distributors of resistance lubricator proportion devices.

　

Model

YET-A1

YET-A1P1

Voltage(single phase)

110V or 220V

Lubricating time (second/minute)

1-999

Intermittent time(second/minute/hour/cycle)

1-999

Output bore

4 or 6

Max. output pressure(kgf/cm2)

7

Output volume

200cc/min

Pressure release device

X

X

Pressure switch(kgf/cm2)

X

2-4

Float switch

O

O

Alarm beeper

O

O

Reservoir capacity

2L / 3L

Weight(kg)

4.7 / 4.4

<Back>

YET-A1-3L