GAM 960 Hole Inspector for Printed Circuit Boards
  • Windows interface ：Easy to learn.
  • Adjust the inspection speed based on needs.
  • Set up the inspection & non-inspection area.
  • Set up the hole diameter on needs.
  • Unique Image Processing Technology ：High Inspection Reliability.
  • Can tolerate the ±30 degrees deviation of the standby plate.
  • Compare with PCB or CAM standard.
  • Fully auto focusing function.
  • Unique function can reduce the error percentage.
  • The base board can rotate 8 directions.
【Application】
  • Finished board inspection.
  • Bare Copper Board Inspection after drilling.
  • Match the SPC statistic data sheet.
  • Can measure the flexible pc boards (available under 0.15mm)
【Option】
  • Loader.
  • Tube.
  • Illumination meter.

【Inspection Items】

  • Inspect standard board hole quantity.
  • Inspect test board hole quantity.
  • Inspect defective hole quantity.
  • Inspect good hole quantity.
  • Inspect surplus hole quantity.
  • Inspect lack hole quqntity.
  • Inspect of hole diameter.
【Inspection Standard Setting】
  • Windows interface：Easy Operation.
  • Set up manufacturing tolerances based on different drill's diameter.
【Display Drill's diameter position】
  • Display Drill's size and position.
  • Convenient to save data with complete file format.
【Analysis form of Drill's Diameter】
  • Display the analysis form of drill's diameter.
  • Index for improving processing and quality.
【Set up qualified conditions】
  • The user can set up the manufacturing tolerances on his own.
  • The user can set up the condiction for qualification.
  • Windows interface：Easy to operate.
【System Setting】
  • Image interface for parameter setting.
  • Provide machine and control parameter adjusting.
  • Easy to operate without burden to learn.
【Color Display】
  • Different hole shape be displayed by different color.
【Editor】
  • Felxible operation interface.
  • Could be inspection by special hole shape.
  • Could be inspection by part range.
  • Could be set to inpect one hole.
【Modify Hole】
  • Could editor hole diameter of standard PCB in which to promore recognization.
【Inspect Result】
  • List the result of defective hole for user could control quality prompt.
【Specification】
　 　 　 　
　 Board Size W110*L130mm~W660*L660mm 　
　 Board Think 0.1~7mm(under 0.15 needs the jig) 　
　 Range of Hole Diameter 0.15~10.0mm 　
　 Max. Quantity of Inspection 400000 　
　 Inspect speed 1、2、3、5、7、10 m/min 　
　 Accuracy (±)20μm 　
　 Max. Slanting angle 30° 　
　 Focusing function Auto Focusing 　
　 Voltage AC220V three phase 50/60Hz 1.5KVA 　
　 Dimension 3801(L)×1190(H)×1530(H)mm(Include Unloader) 　
　 Weight 1300(kg) 　
　 Air Capacity 7kg-cm2 　
　 System Windows 　
　 Software
  1. Windows interface
  2. Different shape of hole be displayed by different color.
  3. Include editor, setting, revising function.
  4. Show the inspection result on computer immediate.
  5. Set up the manufacturing tolerances based on needs.
  6. Inspection for surplus hole, lack hole, hole diameter, defective hole.
  7. Inspection shape of hole, include circular hole, slotting hole, 8 shape hole, square hole.
  8. Provide of statistic chart.
　
　 Others
  1. Warranty term under one year
  2. Free of charge for update software during warranty term.
　
　 　 　 　
【View】
　
Above View 　
Front View
Lateral View
　
　 (Unit:mm) 　
【Download】
　 　 　 　
　 Catalogue GAM960.pdf (320k) 　
　 Video GAM960.mpg (24.1MB) 　
　 Manual GAM960.pdf (320k) 　
　 　 　 <Back ● Next>